What are the classification and purchasing skills of hardware products
Date:2016-05-11 Author: Click:
There are many categories of hardware products, which are divided into ordinary hardware and special hardware according to the functions used. Ordinary hardware is divided into sliding rails, decorative handlebars, and decorative locks according to the setting method; Special hardware is divided into bathroom hardware and kitchen pendant according to the setting method.
In the purchase of hardware accessories, should select the seal performance of good combination of leaves, sliding rails, locks, hinges; Select a lock with good flexible performance. When shopping, you can have keys inserted and pulled several times to see if it is not smooth and whether the switch is screwed up. Choose the kind of decorative hardware with good appearance.
1, kick board
Kick board is often ignored, in fact, the kitchen cabinet may be the first problem is it. Because it is closest to the ground, if the ground is very wet, it is likely to swell and mold. There are two kinds of kick boards: wooden kick boards and frosted metal kick boards. Wooden Kickboard manufacturers generally use the remaining corner waste when making cabinets, and the cost is low. However, due to the close distance between the kick board and the ground, the wooden material is prone to water absorption and moisture, and water vapor will threaten the entire cabinet along the kick board.
2, rail drawer
The guide rail is divided into two sections and three sections. When choosing, the brightness of the paint and electroplating on the outside, the gap and strength of the load-bearing wheel determine the flexibility and noise of the drawer opening and closing. The load-bearing wheel with wear resistance and rotation should be selected.
3, steel pumping
Knife and fork plates are accurate in size, standardized, easy to clean, not afraid of pollution, and will not deform. They have an irreplaceable role in the maintenance and use of kitchen cabinets and drawers. It has long been widely used by kitchen cabinets companies in developed countries such as Germany, the United States, and Japan. Therefore, when you roughly observe the appearance of the kitchen cabinets, you should open each drawer to look at it. If you use a combination of steel pumps and knives and forks, it shows that the product costs are higher, the kitchen cabinets are more standardized, and vice versa. If you use a wooden drawer, then the cost is lower.
4, hold hands
The materials of the handle are zinc alloy, copper, aluminum, stainless steel, plastic, logs, ceramics, etc.. In order to match with various styles of furniture, the shape and color of the handle are more colorful and colorful. After electroplating and electrostatic paint pull, with wear resistance and anti-corrosion effects, in addition to the choice of room decoration style, but also should be able to withstand a large pull force, the general handle should be able to withstand more than 6 kilograms of pull.
5, combined pages
The main types of laminated hardware are divided into three types: door closure, drawer guide rail, and cabinet door hinge. The door closure material is both copper and stainless steel. The single page size standard is 10cm × 3cm and 10cm × 4cm, the diameter of the middle axis is between 1.1 cm and 1.3 cm, and the thickness of the closure wall is 2.5 mm to 3mm. When selecting the page, in order to open easily and noiseless, the shaft containing ball bearings should be selected.
6, Hinge cabinet door
The hinges are divided into two types: detachable and non-detachable. After the cabinet door is closed, the cover position is divided into three types: large bend, middle bend, and straight bend. Generally, the middle bend is the main one. Selection hinge in addition to visual and hand hinge surface smooth smooth, should note that the hinge spring reset performance is good, can open the hinge 95 degrees, with the hand to press the hinge on both sides of the hinge, observe that the support spring does not deform, do not break, Very strong for quality products.
The above is the classification of hardware products and purchasing skills, only understand the classification of hardware products can be selected suitable products.
Tags:Hardware.
Browse:
Products:
News:
- Chinese hardware global attention
- How does hardware stamping parts small and medium-sized processing enterprise survive?
- Relationship between bending gap and material
- In the first three quarters of 2015, Chinas exports of hardware products to emerging markets and some countries along the Belt and Road grew well
- October 2015 Chinas hardware industry exports and growth rate drop
- China Hardware Products Association 2016 Working Conference in Beijing
- Knowledge and terminology required for hardware stamping
- The Chinese Hardware Industry has entered a fanatical era
- What parts does a lighter have?
- CCTV Network: China Enterprise Innovation Forum 2013 Annual Conference, Jin Rui Hardware Company Chenzonghuo "2013 China Enterprise Innovation Outstanding Person"